|HEATED SEAT CUSHION INSTRUCTIONS|
|Unpack the THERMO SEAT along with the Li-Ion Polymer battery and adapter.
The battery of the THERMO SEAT is not charged and must be fully charged for 9 hours before first use..
|The Y-Cable is already connected to the main adapter cable. Connect one of the two adapter cables to the socket of the battery. Then plug in the adapter to the outlet to charge the battery. The second adapter cable can be used to charge two batteries at the same time (second battery is not included). A second battery can be purchased additionally to extend the heating time.
After the initial charge, the regular charging time is approximately up to 8 hours, depending on the charging state of the battery. The adapter is designed to protect and guarantee a long life of the battery. Overcharging is not possible.
The two LED lights on the Y- cable turn to red during loading and then change to green after loading is completed! If for any reason the charger detects irregularities during charging, the safe charge function will be activated, resulting in an increase of the charging time. After the seat cushion is fully charged, unplug the adapter and disconnect the cable from the battery. Store the battery in the pocket of the seat and close the Velcro strap. Use second compartment for additional battery to prolong the heating time.
|When using your THERMO SEAT open the Velcro strap of the battery pocket of the seat cushion and connect the cable, which is inside the pocket, to the socket of the battery firmly. Store the battery inside of the pocket and close the Velcro strap.
The Heating Mode is activated by pressing the ON/OFF keypad control button located on the top of the battery pocket for about 3 seconds. The LED light on the keypad control will then flash and light up, indicating that the seat is in the heating mode.
|The temperature can be adjusted by pressing and releasing the keypad control button.|
|L - Green LED||34 °C with approximate heating time of 4 – 5 hours|
|M - Yellow LED||39 °C with approximate heating time of 3 – 4 hours|
|H - Red LED||44 °C with approximate heating time of up to 2 hours|
Please note that the actual heating time always depends on the outside temperature. The Li-Ion batteries reach its full power after having been fully charged and fully drained several times! Additional batteries packs can be purchased separately if extended heating times are needed! Turn OFF the seat cushion by pressing the ON/OFF keypad control button several seconds until the LED light turns off.
|Always unplug the battery when the seat is not in use and store them in the battery pocket of the seat cushion.
The high-quality 2.700 mAh Li-Ion Polymer Battery (no memory effect!) cannot be damaged by frequent charging and can be re-charged approximately 500 times!
|1) The seat can be rolled up for easy storage in the travel pouch. Roll up with Mesh and battery pouch inside!
2) For best performance it is recommended not to fully charge the battery if the seat cushion is not being used for a longer period of time! Charge for 30 minutes only and after 3 months charge the battery again for about 30 minutes!
Charge the battery completely before using the seat again.
|Please perform the following test in case you feel that the seat cushion is not heating correctly:|
|DISCARDING OF THE SEAT:|
Discard THERMO SEAT with approved collection agencies only! In order to save our environment, do NOT dispose of the seat cushion and battery in your normal household trash.
In connection with the sale of batteries or with the delivery of devices that contain batteries, we are under obligation to bring the following to your attention: As the end user, you are legally under obligation to return used batteries. You can return old batteries, which we
|best price guarantee|
|Purchase directly from the manufacturer|
|Mail order company since 2007|
|2 years warranty|
|Free shipping from € 165,00|
|Positive customer reviews|
|Fast service in case of customer enquiries|
|High data protection|
|coss-county skiing||horse riding|
The Thermo Seat has 3 different temperature levels with 34 degrees C, 39 degrees C and 44 degrees C.
Did you know?
Local cold and moisture in the area of the buttocks and the bladder can cause or expedite the development of urinary tract infections. Physicians recommend a heated seat cushion to prevent such symptoms.
|Sign up to our email Newsletter|